Sealant Pumps & Adhesive Dispensing Systems
When you need a quality seal or a precise dispensing system for adhesives, count on ARO for your application.
ARO Solutions
Adhesives and sealants are commonly used in a wide range of industries. Dispensing applications include automotive assembly, window and door manufacturing, OEM glass supply, home and commercial appliance assembly, solar panel construction and electronic manufacturing.
No matter your production process, consistency and accuracy are vital when applying adhesive and sealants. Our high quality piston pumps and adhesive application systems ensure durability and leak-free performance. Our fluid dispensing solutions are expertly designed to handle:
- Dispensing, spraying or injecting materials with high precision, including epoxy, acrylic, silicone, polyurethane and PVC
- Tackling tough materials, such as high abrasive thermal paste, humidity sensitive PUR adhesive or corrosive methyl acrylate adhesive
- Proper adhesion and sealing of insulated glass panels
- Transferring medium- to high-viscosity materials from 5 to 55 gallon containers
Selecting the Right Piston Pump for Adhesive Applications
Due to the higher viscosities of adhesives and sealants, piston pumps usually offer the best performance. Based on material viscosity, two types of piston pumps are generally used:
- Chop-check pumps are self-priming and can move very thick fluid material. They are used in very high viscosity adhesive applications — up to and over one-million Centipoise (cPs).
- Two-ball pumps create a vacuum to pull fluid into the pump. They are used for adhesives of lower relative viscosity, or where the material must be moved more gently due to suspended beads or catalyzing agents.
By their physical nature, chop-check piston pumps generate a lower flow rate compared to 2-ball pumps. However, both types can be configured to operate within the same pressure range. As viscosity increases, a follower plate is often needed to help move the material from the container into the pump.
Many manufacturers use specialty adhesives formulated specifically for their applications. When integrating piston pumps and in-line components, ARO distributors and OEM system builders pay very close attention to the special challenges and requirements presented by the specific adhesive or sealant used for your application.
Dispensing Solutions for High Strength Industrial Adhesives
New types of adhesives for industrial applications are replacing spot welding, rivets, and other fasteners. These custom formulated adhesives often provide labor and materials cost savings, reduced weight, and higher bond strength.
Used for both automotive and general manufacturing purposes, these new adhesives are applied using a wide variety of delivery systems. Fully robotic dispenser systems rapidly apply a precise, consistently measured bead of adhesive to pieces such as an unprimed body panel or windshield. Gun-based applicator systems are used by plant workers to manually apply adhesives to panels and parts during production line assembly.
To achieve a more consistent flow and bead of material during application, fluid regulators can be added downstream of the pump. This controls fluid pressure beyond the regulator, cutting fluid pressure to the desired level to ensure smooth delivery.
Features & Benefits
The ARO Difference
Industrial and manufacturing professionals have relied on ARO products since 1930. Our versatile pumps deliver the power and dependability you need to keep things moving.
Resources
Piston Pump Motor Technologies
Piston Pump Fundamentals
Piston Pump Selector with Ratio Calculator
