Maximum Flow: 184 GPM (696 LPM)
Maximum Discharge Pressure: 120 PSI (8.3 bar)
Fluid Ports Inlet/Outlet: 2” ANSI/DIN Hybrid Flange (Side or Center Ports)
Material of Construction: Polypropylene, PVDF, Conductive Polypropylene, Conductive PVDF
Maximum Solids: 1/4 inches (6.4 mm)
Maximum Dry Suction Lift: 14 feet (4.2 meters)
ARO EXP 2” non-metallic pumps achieve flow rates of up to 184 GPM (696.4 LPM) and offer a wide array of material and porting configurations. 2” non-metallic pumps are often used for transfer, filling, recirculation and batching in Chemical, Industrial and Water/Wastewater treatment markets.
Available with Long-life PTFE diaphragms.
Up to 4 times the life of traditional diaphragm pumps due to the EXP's convoluted diaphragm design
Efficiency - Simul-Shift™ valve provides ultra-positive, reliable shift signal
Reliability - ARO's patented 'Unbalanced' air valve ensures no-stall operation
Versatility - Broad range in materials of construction for optimum fluid compatibility
Environmentally Sound - Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking
Serviceability - Easier service through modular design
Maximum Flow: 184 GPM (696 lpm)
Displacement per cycle: 1.4 gallons (5.3 liters)
Air Inlet (Female): 3/4 - 14 N.P.T.
Fluid Inlet/Outlet: 2” A.N.S.I./DIN Hybrid Flange (Side or Center Ports)
Max. operating pressure: 120 PSI (8.3 bar)
Suspended solids maximum diameter: 1/4” (6.4 mm)
Polypropylene, Side Ported 85.3 lbs (38.7 kg)
Polypropylene, Center Ported 91 lbs (41.2 kg)
PVDF, Side Ported 110.9 lbs (50.3 kg)
Maximum dry suction lift: 14 ft (4.2 m)
Sound Level: 70 PSI 60 Cycles/Min 85.0 db(A)
Muffler Included: 93139
ARO is Fluid Intelligence and a leading worldwide manufacturer of fluid handling products that are expertly engineered to deliver performance and serviceability, enabling our customers to achieve the best total cost of ownership.