AF1044 Extrusion Series Pumps

AF1044 Series Chop Check Piston Pumps & Packages

44:1 Ratio
10" Air Motor
6 GPM (22.9 LPM) Max Flow
Max Fluid: 3,960 psi

44:1

10"
AFX
Series
 

Available Models

Pump Model** Lower Pump Model Material Plunger Material Upper Packings Lower Packings Lower Pump Model Pump Service Kit
AF1044S11FF47 Carbon Steel Nickel Plated 17-4 Stainless Steel, w/Hard Chrome UHMW-PE UHMW-PE 67300-C4D 637348-C4D
AF1044S11PF17 Carbon Steel Nickel Plated 17-4 Stainless Steel, w/Hard Chrome Polyurethane UHMW-PE 67300-J3D 637348-J3D

**Add “-1” to Model No. for Ball Valve Regulator

Chop-Check pumps are designed to move medium-to-high viscosity fluids in difficult applications.

The heavy-hitters of the line, ARO® chop-check pumps are designed to move medium-to high- viscosity fluids ranging from 15,000 cPs to more than 1,000,000 cPs, and at delivery rates up to 12.2 gpm (46.3 L/min).

Applications advantages of Chop-Check:

Extrusion: Chop-Check pumps are workhorses - able to deliver viscous adhesives, sealants, caulking and heavy lubricants to the application point at the desired pressure and flow rate.

Transfer & Supply: Depending on the model, some Chop-Check pumps are capable of achieving flow rates up to 12.2 gpm, ensuring efficient transfer of heavy greases, inks and other viscous materials.

Materials advantages of Chop-Checks:

Chop-Check pumps have a primer piston to ‘feed’ material into the pump. They are often used in conjunction with a follower plate to force material down. This prevents loss of prime due to Channeling - a condition where the pump inlet becomes surrounded by air due to the cavity formed when a high viscosity material does not level off when removed (Slumpability).

  • Stringy materials: Chop-Checks have mechanical, flat checks to overcome materials that resist cut-off and adhere to themselves.
  • Tacky materials: Chop-Check pump options come in high ratios to generate the fluid pressure needed to move materials that will adhere to hoses and equipment while wet.

Specifications

Ratio 44:1
Stroke 6” (15.24 cm)
Material Inlet Flange Mount
Material Outlet 1-1/4” NPT(F)
Air Inlet (female) 3/4” NPT(F)
Air Inlet Pressure Range psi (bar) 30 - 90 (2.1 - 6.2)
Fluid Pressure Range psi (bar) 1320 - 3960 (91.0 - 273.1)
Max Cycles/Minute 70.0
Displacement/Cycle cu in (cm3) 20.0 (327.8)
Cycles/gal (L) 11.5 (3.0)
Flow @ 60 Cycles gpm (L/min) 6.0 (22.9) (@70 Cycles)
Noise Level @ 60 psi dBA 89.8
Weight* lb (kg) 64 (29.06)
Container Suitability Remote Mounting
61204X-X Series Pumps
AF1044-extrusion-dim

Dimensions

A* in (mm) 53.43 (1357.12)
B in (mm) 30.38 (771.53)
C in (mm) 19.25 (488.95)

*For models without ball valve regulator subtract 2.08 in (52.83 mm)

TPX Series Two Post Ram - 55 Gallon

Model No.  Package Type Pump Model  Ram/Lift Model Follower Follower Seal Description Material

TP1044S51FF47AM2

55 Gallon Two Post Ram

AF1044S11FF47

RM552S-C

67196-1

Double Tube, Neoprene

Aluminum

TP1044S51FF47AC2

55 Gallon Two Post Ram

AF1044S11FF47

RM552S-C

66517

Doubel Lip, Nitrile

Aluminum

HD1044S51FF47AN2

55 Gallon Heavy Duty Two Post Ram

AF1044S11FF47

RM552H-C

67196-2

Double Tube, EPR

Aluminum

TP1044S51FF47AM0_2__l

Recommended Accessories

Extrusion Guns
651500
For material over 200,000 cP 3/8” (F) inlet
651533 For low- to medium-viscosity fluids 1/4” NPS (M) inlet

Extrusion Gun Nozzle Kits
66541-6
Orifice .063” (1.63 mm), 66541-9 Orifice .093” (2.36 mm),
66541-2 Orifice .125” (3.17 mm)

Swivel
636085
Straight, 3/8” (M) x 3/8” (F) / fabric with neoprene / 8,000 psi (552 bar) max. working pressure
636088 Z-360°, 3/8” (M) x 3/8” (F) / fabric with neoprene /  8,000 psi (552 bar) max. working pressure
75364 Straight, for use with 651533 gun / 1/4”-18 NPTF to 1/4”-18 NPSM / 10,000 psi (690 bar) max working pressure

Material Filters
1” F (2) inlet 3/8” F (3) outlet / 6,000 psi (414 bar) max. / Carbon Steel
651418-40-B for 40 Mesh (375 Microns)
651418-70-B for 70 Mesh (200 Microns)

3/4” Fluid Pressure Regulators
651780-C1B-B
Regulated 750 – 2,500 psi (52 – 173 bar) /
6,000 psi (414 bar) max. inlet / carbon steel
651780-C1C-B Regulated 2,000 – 5,000 psi (138 – 345 bar) /
6,000 psi (414 bar) max. inlet / carbon steel
651780-C3B-B Regulated 750 – 2,500 psi (52 – 173 bar) /
6,000 psi (414 bar) max. inlet / stainless steel
651780-C3R-B Regulated 750 – 5,000 psi  (52 – 345 bar) /
6,000 psi (414 bar) max. inlet / stainless steel