EVO Series electric diaphragm pump with hazardous duty motor

Click to enlarge

Back to the product list

2" EVO Series Metallic Electric Diaphragm Pump

Available in aluminum, stainless steel or cast iron for aggressive chemicals or high temperature fluids

Pump Types: Standard Duty or Hazardous Duty

Maximum Flow Rate (flood inlet): 140 GPM (530 l/min)

Displacement Per Cycle: 0.69 gallons (2.6 liters)

Inlet Pressure: 60 PSIG (4 bar)

Maximum Average Working Pressure: 120 PSIG (8.3 bar)

Fluid Ports (inlet/outlet): ANSI / DIN Hybrid flange

Maximum Particle Size: 1/4” diameter (6.4 mm)

Wet Suction Lift: 30 ft (9.1 m)

Dry Suction Lift: 18 ft (5.5 m)

Maximum Deadhead Pressure: 180 PSIG (12.4 bar)

Request a Quote Request Service, Parts or Support

Overview

Introducing the EVO Series™ Electric Diaphragm Pump from ARO. This revolutionary pump takes the best features of many positive displacement pump technologies and combines them into one breakthrough product.

EVO Series™ Electric Diaphragm Pump Features

Designed for Safety

Real Deadhead Protection: An encoder senses the speed and will slow the motor down and hold the programmed system pressure for long periods of time. The automated system enables the pump to restart the process without priming or can be programmed for automatic shutdown.
Built-in Leak Detection: Sensors can detect diaphragm failure and shut down the pump to avoid leaks. For added protection, the pump was engineered with secondary seals to protect the actuation mechanism in the unlikely event of such an occurrence.

Designed for Control

You can monitor and control the pump flow according to changing process parameters like flow, head, torque and others.

Designed for Efficiency

The EVO Series™ innovative design can save more than 20% on energy costs compared with competitive models and technologies

Designed to Perform

Unique 3-chamber design significantly reduces pulsations without additional dampener accessories
The compact footprint fits into small operational spaces and installation is easy, with no need for a base plate or shaft alignment

Specifications

Models	Aluminum Cast Iron Stainless Steel
Maximum Flow Rate (flood inlet)	140 GPM (530 l/min)
Displacement Per Cycle	0.69 gallons (2.6 liters)
Fluid Inlet / Outlet Hybrid - internal thread	ANSI / DIN Hybrid flange
Stroke	1.75" (44.45 mm)
Inlet Pressure	60 PSIG (4 bar)
Maximum Average Working Pressure	120 PSIG (8.3 bar)
Maximum Deadhead Pressure	180 PSIG (12.4 bar)
Suspended Solids Maximum Diameter	1/4” diameter (6.4 mm)
Wet Suction Lift	30 ft (9.1 m)
Dry Suction Lift	18 ft (5.5 m)
Diaphragm / Ball Check Size	1.5" (38 mm) equivalent
Peak Efficiency	70%
Maximum Pump Speed	198 rpm
Weight	VFD: 36 lbs (16 kg) Motor: 236 lbs (107 kg) Aluminum Pump Head: 376 lbs (171 kg) Stainless Steel or Cast Iron Pump Head: 517 lbs (235 kg) Pallet: 52 lbs (24 kg)
Mounting Dimension / Circumference Radius	3 equally placed 0.63” (∅ 16 mm) hole on 29.8” (∅ 758 mm) B.C. / 32.6" (828.9 mm)
Dimensions *Pump with Gear Motor (not including hazardous encoder)	Height: 22.9" (581.7 mm) until outlet flange *51.78" (1315.4 mm); Hazardous Encoder Height: 5.09" (129.4 mm) Length: 29.05" (737.8 mm) Width: 34.3" (872.2 mm)

AC Gear Motor

Rated Power / Phase / Voltage / Efficiency	5.5Kw / 3 Phase / 400V / IE3
Type and Classification	ATEX / ICEx II2 G Ex db IIB T4 Gb \| II2 D Ex tb IIIC T125o C Db NEC / CEC Class 1, Div 2 Group A-D \| Class 2, Div 2 Group E-G
Gear Ratio	12.7:1
Encoder	5V 1024 pp
Motor Amps @ 400V / 50Hz	11.3 A
Weight	Standard: 236 lbs (107 kg) Hazardous Duty: 304 lbs (138 kg)
Dimensions for Standard & Hazardous Duty (Not including hazardous duty encoder)	Height: 31.6" (802.5 mm) Length: 10.2" (258 mm) Width: 10.2" (258 mm)
Dimensions of Hazardous Duty Encoder	5.09" (129.4 mm)

Drive - 3 voltage models available

Rated Power / Phase / Voltage	7.5 Kw / 3 Phase / 380V-500V	7.5 Kw / 3 Phase / 200V-240V	7.5 Kw / 3 Phase / 525V-600V
Frequency	50Hz / 60Hz	50Hz / 60Hz	50Hz / 60Hz
Maximum VFD Speed	84Hz	84Hz	84Hz
VFD Input Amps (Continuous @ 441-500V)	13 A	28 A	10.4 A
VFD Input Amps (Intermittent @ 441-500V)	20.8 A	44.8 A	16.6 A
Type and Classification (For hazardous configurations only. Please note: VFD should not be installed in a hazardous area.)	II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc]	II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc]	II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc]
Weight	31 lbs (14 kg)	51 lbs (23 kg)	31 lbs (14 kg)
Dimensions	Enclosure Size Type: A5 Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm)	Enclosure Size Type: B1 Height: 18.9" (480 mm); Width: 9.5" (242 mm); Depth: 10.20" (260 mm)	Enclosure Size Type: A5 Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm)

Service Kits & Accessories

Fluid Section Service Kit: Balls, Diaphragms, Bellows and O-rings	637555-XX (More details below)
PRV (Pressure Relief Valve) Service Kit	67557-X (More details below)
Crankcase Service Kit	EP20-CSVX-00-A (More details below)
Crankcase Seals Service Kit	637556
Oil and Filter Replacement Kit	637557
Oil Piston Pump Assembly	67558

AFTERMARKET SERVICE KIT PART NUMBER	DESCRIPTION
637555-AA	Balls - Santoprene Diaphragms - Santoprene
637555-TA	Balls - PTFE Diaphragms - Santoprene
637555-TT	Balls - PTFE Diaphragms - PTFE
637555-ST	Balls - 316 SS Diaphragms - PTFE
EP20-CSVA-00-A	Crankcase - Aluminum Air Cap
EP20-CSVS-00-A	Crankcase - Stainless Steel Air Cap
67557-1	PRV - Aluminum
67557-2	PRV - Cast Iron
67557-3	PRV - Stainless Steel

Diaphragm Materials

Long-Life PTFE
Santoprene^®

Downloads

EVO SERIES™ ELECTRIC DIAPHRAGM PUMPS

Product Overview Brochure

EP20-XXXXX-XXX-XXX EVO SERIES Operator's Manual

2” ELECTRIC DIAPHRAGM PUMP WITH METALLIC FLUID SECTIONS

About ARO

ARO is Fluid Intelligence and a leading worldwide manufacturer of fluid handling products that are expertly engineered to deliver performance and serviceability, enabling our customers to achieve the best total cost of ownership.

209 N. Main Street
Bryan, Ohio 43506 | 800-495-0276

Learn more about ARO Fluid Management